RINOL ETEC THIXO
A three-layer epoxy system with an anti-slip, easy-to-clean surface that also provides electrostatic discharge. Slip class R9–R10 to DIN 51130.
Wet floors are one of the most common causes of workplace accidents. In washdown areas, loading bays and departments where liquids or product residues are present, a floor that offers little grip turns a routine shift into a risk. Yet the same floor must still be easy to clean, because a surface that traps dirt creates its own hazard.
The challenge is to find a surface with real grip that stays hygienic and practical. Our anti-slip resin floors are designed for exactly this balance, and each one is selected for the conditions of the area.
RINOL anti-slip systems combine a textured surface with a finish that remains practical to clean. We select the level of grip for each area, so that the surface is not more aggressive than the use requires.
Where an area needs electrostatic control as well as grip, we recommend systems that provide both, and we confirm the requirement with your team before the installation.
A three-layer epoxy system with an anti-slip, easy-to-clean surface that also provides electrostatic discharge. Slip class R9–R10 to DIN 51130.
A three-layer epoxy system with an anti-slip, easy-to-clean surface and electrostatic discharge. Slip class R9–R10 to DIN 51130.
A jointless sealing system for chemical spillages, available with a sand-scattered anti-slip finish. Slip class R9–R13 to DIN 51130.
A water-based, vapour-permeable, low-emission epoxy system with an anti-slip finish, for medium to heavy duty industrial floors.
A premium multilayer polyurethane-cement system for areas with a high risk of slips. It tolerates liquid spills, temperature shocks and freezer conditions.
The certifications and standards below are those stated in the data sheet of each system.
| System | Certification or standard |
|---|---|
| RINOL ETEC THIXO |
|
| RINOL SEALING THIXO AST |
|
| RINOL SEALING CR |
|
| RINOL STANDARD ECO ANTI-SLIP |
|
| RINOLCRETE ANTI-SLIP |
|
The slip classification of each system is stated in its data sheet, to DIN 51130 where it applies. We confirm the class of the system we recommend for your area.
The finish is chosen to reduce slipping without trapping dirt. Each data sheet describes how the system is cleaned.
Yes, for ETEC THIXO and SEALING THIXO AST, which provide electrostatic discharge as well as an anti-slip surface.
Yes, with phased work. We agree the sequence with your team so that the operation continues.
Routine cleaning with suitable products keeps the anti-slip finish effective. We provide guidance with each installation.
Tell us about the area, whether liquids are present and whether electrostatic control is needed. Our technical team will recommend a system and arrange a site visit.