Resin floors that resist oils and fuels in industrial sites

Workshops, warehouses and maintenance areas are where oils, diesel, kerosene and petrol are used every day. A spill that is not cleaned quickly soaks into untreated concrete, leaves permanent stains and creates a slip hazard. Over time the floor deteriorates exactly where it is used most.

An oil resistant floor, built for these conditions, keeps the surface sealed, makes spills easy to remove and protects the concrete beneath. The right system depends on how often the contact happens and how heavy the traffic is.

Talk to our technical team
Oil resistant floor

The problems behind oil and fuel damage

  • Oil and fuel spills that soak into the concrete and cannot be fully removed.
  • Stains that make the floor look neglected and hide the real condition of the surface.
  • Slippery patches that increase the risk of accidents.
  • Repairs that interrupt maintenance work in the same areas.
  • Cleaning products and solvents that attack an unprotected surface.
fuel resistant flooring in an industrial setting

How RINOL protects oil and fuel areas

The RINOL systems below state their resistance to mineral oils, diesel, kerosene and petrol in their data sheets. We select the system according to the type of contact, the traffic and the finish needed for the area.

For an occasional spill in a light-duty area, a sealing system is often enough. For more demanding chemical exposure, a vinylester or chemical-resistant epoxy is the better choice.

Oil resistant RINOL system

Recommended systems

Rinol Perm

RINOL PERM

A water-based, jointless sealing system for light to medium duty. Its data sheet states resistance to mineral oils, diesel, kerosene and petrol.

Rinol Sealing CR

RINOL SEALING CR

A jointless sealing system for areas exposed to chemical spillages, with a sand-scattered anti-slip finish available.

Rinol Allrounder VE

RINOL ALLROUNDER VE

A high chemical resistance vinylester system, jointless, for areas with strong chemical exposure.

Rinol Standard CR

RINOL STANDARD CR

A two-layer chemical-resistant epoxy system, available smooth or anti-slip, for medium to heavy duty industrial floors.

Rinol WHG

RINOL WHG

A two- or three-layer epoxy system with chemical resistance and crack-bridging properties.

Certifications and standards

The certifications and standards below are those stated in the data sheet of each system.

SystemCertification or standard
RINOL PERM
  • CE marking, as stated in the data sheet (EN 13813 / EN 1504-2).
  • Indoor Air Comfort Gold (low VOC emissions), as stated in the data sheet.
  • The data sheet states that the system supports compliance with BREEAM criteria. This contributes to a project's assessment; it is not a certification of the product.
RINOL SEALING CR
  • CE marking, as stated in the data sheet (EN 13813 / EN 1504-2).
  • DIN 51130 slip class R9–R13, as stated in the data sheet.
RINOL ALLROUNDER VE
  • CE marking, as stated in the data sheet (EN 13813 / EN 1504-2).
RINOL STANDARD CR
  • CE marking, as stated in the data sheet (EN 13813 / EN 1504-2).
  • DIN 51130 slip class R9–R13, as stated in the data sheet.
RINOL WHG
  • CE marking, as stated in the data sheet (EN 13813 / EN 1504-2).
  • DIBt approval under the German Water Resources Act (WHG), as stated in the data sheet.

Choosing the right system

Occasional spills in light-duty areas RINOL PERM or RINOL SEALING CR
Strong chemical exposure RINOL ALLROUNDER VE
Medium traffic and cracks in the substrate RINOL WHG
Medium traffic with an anti-slip finish RINOL STANDARD CR

Frequently asked questions

Does a resin floor resist petrol?

It depends on the system and the duration of contact. Each data sheet states the declared resistance, and we recommend a technical review of the substances used on site.

Can the system be applied over an existing floor?

Yes, after the surface has been prepared as specified for the chosen system.

How quickly can a spill be cleaned?

Resin surfaces are continuous (seamless), so spills can be wiped up without leaving joints where liquids collect.

Can the floor be repaired after a spill has soaked in?

Localised repairs are possible, and we can advise on the best approach for each case.

Is the system suitable for a workshop with both oils and cleaning chemicals?

Yes, when the system is selected for the full range of substances. We confirm this during the site visit.

Talk to our technical team

Tell us the type of substance, how often contact occurs and the size of the area. Our technical team will recommend a system and arrange a site visit.